Double Skin Curtain Wall
The double-skin curtain wall is a system of the building consisting of two skins, or facades, placed in such a way that air flows in the intermediate cavity. The ventilation of the cavity can be natural, fan-supported or mechanical. Apart from the type of the ventilation inside the cavity, the origin and destination of the air can differ depending mostly on climatic conditions, the use, the location, the occupational hours of the building and the HVAC strategy.
The glass skins can be single or double glazing units with a distance from 20 cm up to 2 metres. Often, for protection and heat extraction reasons during the cooling period, solar shading devices are placed inside the cavity.
Performance
◉Thermal Insulation: The K value for thermal insulation can reach 1.5W/m2.k (Grade 8 ⭑⭑⭑⭑⭑⭑⭑⭑)(depending on the glass configuration)
◉Sound Proofing: The attenuation value of sound after passing doors can reach 45dB (Grade 6 ⭑⭑⭑⭑⭑⭑)(depending on the glass configuration)
◉Air Tightness: The value can reach 600Pa (Grade 8 ⭑⭑⭑⭑⭑⭑⭑⭑)
◉Water Tightness: The value can reach 700Pa (Grade 6 ⭑⭑⭑⭑⭑⭑)
◉Wind Load Resistance: The value can reach 5000Pa (Grade 9 ⭑⭑⭑⭑⭑⭑⭑⭑⭑⭒)
Product Highlights
1. With the effective utilization of curtain wall material and solar energy, the intelligent curtain wall efficiently regulates indoor air, temperature and light through the computer network. Thereby, the building's energy consumption is reduced and the cost is shortened.
2. The exterior layer of intelligent external respiratory double skin curtain wall consists of monolithic glass and non thermal break material while the inner one is constituted by the insulated glass and thermal break material.
3. The exterior layer of intelligent internal respiratory double skin curtain wall is enclosed completely in principle which consists of thermal break material and insulating glass while the inner one is constituted by the monolithic glass or operable window for the convenience of exterior curtain wall cleaning.
Profile Section
Product Description
The cavity between the two skins may be either naturally or mechanically ventilated. In cool climates, the solar gain within the cavity may be circulated to the occupied space to offset heating requirements, while in hot climates the cavity may be vented out of the building to mitigate solar gain and decrease the cooling load. In each case, the assumption is that a higher insulative value may be achieved by using this glazing configuration versus a conventional glazing configuration.
Studies showed that the energy performance of a building connected to a double-skin facade can be improved both in the cold and the warm season or in cold and warm climates by optimizing the ventilation strategy of the facade.
Configuration Option
◉Feature: Modeling, Decoration, Heat Insulation, Security
◉Color: Customized
◉Regular Thickness: Profile & glass thickness depend on local climate and wind speed
◉Size: Customized size
◉Glass: Single/double/triple glass, Low-E, laminated glass
◉Surface treatment: PVDF, Powder coating ( Famous brand) Or Customized
◉Certification: ISO9001-2000, CHINA SQUARE&ROUND COMMITTEE DNV
◉Applicable place: Exterior building/Hotel/Shopping mall
◉Hardware: Famous brand hardware,from Germany or China or Customized
Colors Available
Powder Coating & PVDF (Ral International Code)
Lmitation Wood Effect
Electrophoresis
Anodizing
FAQ
Q: Are you a Manufacturer or a Trading Company?
A: Sunnyquick with her own manufacturer for the glass curtain wall, window and doors;also with a trade company for interior design, R&D,and offer one stop solution service. Welcome to visit our factory base and office.
Q: If my project is small or size not standard, will you have any minimum quantity?
A: Sunnyquick are warmly welcome all clients for any quantity, we can custom made according to your requirements.
Q: How can I know your price?
A: Sunnyquick's price is based on buyer's specific requirement, so please provide below information to help us quote exact price to you. 1) Shop drawing / window schedule to show the window dimensions, quantity and type; 2)Additional like sound proof, dustproof, heat insulation, or other specific request, so that we can give you more exact product proposal.
Q: How can I do if I’m owner and have no ideas about windows and doors?
A: Don’t worry, Sunnyquick will set up a project team for you, providing you quality technical support with quotation analysis, design drawing, tailored solutions and expert guidance for measurement and installation.
Q: What is your payment terms and delivery time?
A: Normally, 30% - 50% of total amount by T/T as deposit and balance before delivery, Irrevocable L/C at sight is also acceptable. Delivery time is 30~50 days.
Q: What will you do if you sending me the wrong windows or missing quanity?
A: Sunnyquick will send you the final shop drawing for your confirmation and signature before production, if send you incorrect by our mistake, we will replace you freely and quickly.
Q: How to install your windows?
A: Sunnyquick will provide you installation solution and guidance according to your project situation, as well freely send the necessary accessories to you.
Q: Can you send installation team to my job site?
A: Sunnyquick can send our team to site if it’s necessary.
Q: What is your warranty?
A: Sunnyqucik provide 10 years quality warranty for aluminium profile and glass, 3~7 years warranty for hardware if working properly under correct operation.
Q: What do we do in case of problems?
A: Any problem, please call contact us, we will reply you within 24 hours. In case of our quality problem, we will provide replacement by international courier.
Curtain Wall
Unitized curtain wall is a new system of facades. The aluminium system is 100% prefabricated in factories. It saves a lot of time and cost in installation, it's the most modern system available in the world now.
The glass of Sunnyquick spandrel curtain wall is embedded in the aluminum frame and becomes a curtain wall component with four sides of aluminum frame. The curtain wall components are embedded on the cross beam to form a facade with exposed columns and aluminum frame. The clear-frame glass curtain wall is the most traditional form, the most widely used and reliable in performance.
The double-skin curtain wall is a system of the building consisting of two skins, or facades, placed in such a way that air flows in the intermediate cavity. The ventilation of the cavity can be natural, fan-supported or mechanical. Apart from the type of the ventilation inside the cavity, the origin and destination of the air can differ depending mostly on climatic conditions, the use, the location, the occupational hours of the building and the HVAC strategy.
Point Fixed Glass Curtain Wall
Point fixed glass systems also called spider glass systems, offer great transparency and unique designing solutions. Point fixed glass curtain wall systems can be introduced in multiple ways, regarding the substructure of the glass facade. (steel substructure, substructure with glass fins, substructure with prestressed stainless steel tension rods, substructure with prestressed stainless steel cables etc.)
The full glass curtain wall is a glass curtain wall made up of glass ribs and glass panels. The full glass curtain wall was born with the improvement of glass production technology and the diversification of products. It provided the conditions for the architect to create a strange, transparent and crystal-clear building.
Stone veneer panel curtain wall consists of stone panels and supportive structures(transom, mullion, connectors etc). Beautiful and natural stones, which looks noble and graceful, and multiple finishes and various selection of stones meet different design needs.
The decorative curtain wall, surround the facade of the building, is completely surround or semi-enclosed. Generally, aluminium plates are used as decorative materials. According to design needs, engraving, colour, hollow, smooth, matte and other rich processing options meet modern architecture. Rich expression form, strong aesthetics, the choice of landmark buildings.